ADS Flat Still Series our most popular panel lightweight durable free of corrosion risk made of an aluminum frame with cross members for rigidity made with one- inch insulation foam covered with a mesh and black silicone for durability and heat absorption can be fully automated for the convenience of a low maintenance system can be manually refilled every evening The front of the still is lower than the back with a sheet of glass covering the top, and tilted toward the front of the still. Water turning to vapor in the still condenses on the inside of the glass and runs down the pane to a collecting tray, leading to silicone tubing for dispensing. The stills are available assembled and ready for use, or in kits for economical and simple on site assembly. Click here for more specs and prices on the ADS Still Series.		TSS Leaner Stills our premier and very efficient still housed in a bronze anodized aluminum frame custom made for this model built with aluminum backing with three-quarter inch insulation foam covered with mesh and black silicone lined with aluminum trays surfaced with mesh and silicone—aluminum trays increase the water surface, improving evaporation, and therefore pure water output tempered glass covers the top Under optimum and identical conditions, a TSS - 6 will produce about the same amount of pure water as an ADS - 8. This still must be tilted between 15 to 40 degrees for best performance. We also manufacture racks to support the TSS still at an optimum angle. Our distillers are guaranteed for a year, but have an expected life of over twenty years, if properly used. Click here for more specs and prices on the TSS Still Series.

© 2006 Agua Del Sol. All rights reserved.